![]() ![]() If your disk is not in a redundant RAID then all data is lost but if you have one or less red LED and a redundant RAID (1, 3, 5) then the data is still available and will be restored when the disk is replaced. You can view the 'RAID' tab in the dashboard to see which disk has failed.įront LED is blinking red and one or more of the back LEDs are solid redĭisks with the solid red indicator on the back have failed and must be replaced. This can result from replacing or removing a disk from the unit. This indicates that the device RAID has recently been damaged and is currently re-syncing. ![]() This means that either the device is shutting down from a heat level or the power has been cut and the UPS is powering the device off.įront LED is blinking blue and the back LEDs are alternating red and blue If you have the device connected to a UPS, it might also indicate that the power supply has failed and the unit is running on UPS power. This indicates that the device is at a critical temperature level and must be shut down. You can access the dashboard and go to the ''backup' tab to view the current progress of the backup job. If you see this happening, it indicates that either the device is booting up or a backup job is in progress. Alternatively, open an internet browser of your choice (Firefox, Chrome, IE) and enter the IP address of your NAS in the address bar. Right click on its icon in the taskbar or finder and selection "Configuration" and then select the disk you wish to access. To access the dashboard, usa the LaCie Network Assistant. The Dashboard can be a useful tool in determining errors and their solutions with your NAS device. Using Dashboard and LEDs to identify problems with the 2big Network 2, 5big Network and d2 Network (Version 1) devices. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |